Spindel Mould for Biothane Adapter - 25 mm

With this spindle mould, you no longer need to estimate where the Biothane should be placed under the hole pipe. If you have marked it off with a pen, place the biothane in the mould and you will be able to punch exactly in the middle. Suitable for Biothane 25 mm.

There are extra guidelines on the sides that are 1.5 cm apart. This means that for longer pieces you don't have to mark it out yourself anymore, because you can align the holes you have already made.

With the 25 mm you can make holes in the middle, but also along the sides because there are 2 holes (perfect when you need 2 hollow staples above each other, which is usually the case with 25 mm)

Only to be used in combination with a 12 mm anvil

Specifications:

• 3D printed
• Colour: Orange
• For making biothane adapter
• Suitable for 25 mm Biothane
• With guiding lines